Crane EE-7272 User Manual download pdf (Page 9)

5

14. Only remove the lifting accessories

from the positioned formwork parts

or units after they cannot change

their position unintentionally.

15. In strong winds, move formwork

elements with guide cables. Avoid

collision with other objects.

16. Store and transport components

so that they do not change

Standards and regulations.

DIN 4420 Working and safety scaffolds

DIN 4421 Falsework

DIN 18202 Tolerances in building

DIN 18216 Formwork ties;

requirements, testing, use

DIN 18218 Pressure of fresh concrete

on vertical formwork

UVV BGV C22 Building operations

UVV VBG 9a Load-carrying gear

BGR 169 Safety regulations for

working and safety scaffolds

BGR 187 Falsework and formwork

construction

BetrSichV Operational safety

regulations

Relevant

PERI product information

TRIO posters

TRIO lifting hooks

TRIO lifting gear combi

Pallets and stacking devices

Technical data

Test report according to GSV

Formwork technology tables

These assembly instructions are

directed at the people who work with

the TRIO panel formwork system. Not

adhering to the assembly instructions

and the safety instructions can lead to

accidents and damage.

Duties of the operator:

1. The operator must ensure that the

instructions delivered by PERI and

other necessary instructions are

available to the users.

2. All persons who work with the

product must be familiar with the

content of these instructions and

the safety instructions contained

therein.

3. The operator must inform any

people who cannot read these

instructions, or can only read them

with difficulty, on the content of

these instructions.

4. The operator must ensure that the

assembly and dismantling of the

product as well as its proper use

is overseen and lead by suitable

professionals who are authorised

to give instructions.

5. The operator must put in place the

necessary conditions for the

adherence to all valid safety

regulations.

General safety instructions:

1. The TRIO components must be

found to be in a faultless state

before every use. Damaged

components must be replaced by

original PERI parts.

2. The TRIO must be assembled in

such a way that all load effects are

safely transferred.

3. Ensure stability during all building

states.

4. Safely establish working locations

for assembly, alteration and

dismantling as well as for moving.

5. Working areas must be reachable

via safely accessible routes.

6. People working at heights of more

than 2.00 m must be secured

against falling.

7. During unfavourable weather

conditions, entering dangerous

areas should be avoided.

8. Only strip the components when

the concrete has sufficiently set

and the person responsible has

authorised it.

9. Carry out stripping or moving with

suitable tools. Do not pull off

formwork elements with a crane!

10. Do not endanger the stability of

building, scaffold and formwork

parts during stripping.

11. Formwork parts may only be

transported with lifting equipment

and load-carrying equipment when

suitable lifting means are available.

12. The weight of the components

may not exceed the permissible

load of the lifting equipment.

13. Remove loose parts or secure so

that they do not fall.

Safety instructions

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 79 80

Comments to this Manuals

No comments